NorCal's I hope I can go to FR11 and meet some cool turtles build thread
+26
Nickgt40
Loco
Dracconix
jpdavis
Djzx3
BigBrooklyn83
FuhFuhhhh Focus
fociboy03
glowin3232
Rudel
98LowRanger
HaveBlue83
Ahuzen
warneej
slocussvt
jholso
BigRed03
matchbox
SVT3658
Cobrawannabe
Kenzx3
trailbikerider
Bellicose87
Yocrew
J_Train
NorCalFocus
30 posters
Page 9 of 10
Page 9 of 10 • 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
You should smooth / paint the degas cover.... it stands out.
Dracconix- Experienced
- Ghey Points : 75
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Chris, you went from FF zero to FLF hero in a very short amount of time. Congrats.
The only thing I don't dig is the hood....
I hope I didn't just offend you
The only thing I don't dig is the hood....
I hope I didn't just offend you
SVT3658- Elitist.
- Ghey Points : 144
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Dracconix wrote:You should smooth / paint the degas cover.... it stands out.
Hmmm, maybe I'll take it off. The tank is black underneath. If I really wanted to do this right, I would fiberglass it.
Thanks gramps!
NorCalFocus- Stawkaa
- Ghey Points : 74
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
SVT3658 wrote:Chris, you went from FF zero to FLF hero in a very short amount of time. Congrats.
The only thing I don't dig is the hood....
I hope I didn't just offend you
NorCalFocus- Stawkaa
- Ghey Points : 74
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
So here it is. SVT bumper installed. Paint doesn't look horrible so I'll leave it for a bit. I went ahead and wet sanded and polished it out today. I'm going to re paint it in the next few weeks. Also went ahead and put my older suspension on. Its lower than the coils and they ride a bit better. Can't wait till the coils sell and I get real lows.
100_1536 by norcalfocus@rocketmail.com, on Flickr
100_1532 by norcalfocus@rocketmail.com, on Flickr
100_1529 by norcalfocus@rocketmail.com, on Flickr
The difference in the colors.
100_1527 by norcalfocus@rocketmail.com, on Flickr
100_1528 by norcalfocus@rocketmail.com, on Flickr
100_1536 by norcalfocus@rocketmail.com, on Flickr
100_1532 by norcalfocus@rocketmail.com, on Flickr
100_1529 by norcalfocus@rocketmail.com, on Flickr
The difference in the colors.
100_1527 by norcalfocus@rocketmail.com, on Flickr
100_1528 by norcalfocus@rocketmail.com, on Flickr
NorCalFocus- Stawkaa
- Ghey Points : 74
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
After all the problems with the SVT bumper this last week, I finally got it down. Went out between rainstorms and put it on today. The battery relocation box didn't work out with the SVT fog lights, so I have the battery back in the OEM location for now. I will be moving it to the trunk soon.
Next up on the list is paint the wheels, move battery to the trunk, repair and install my SVT center console including adding two 12v outlets, started working on my custom dash bezel again to hold an oil pressure gauge, install new stock shifter and cut it (not as short as I have now), install new OEM tails that look way better than mine.
His and hers...
Next up on the list is paint the wheels, move battery to the trunk, repair and install my SVT center console including adding two 12v outlets, started working on my custom dash bezel again to hold an oil pressure gauge, install new stock shifter and cut it (not as short as I have now), install new OEM tails that look way better than mine.
His and hers...
NorCalFocus- Stawkaa
- Ghey Points : 74
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Both cars look great with the SVT fronts I even kinda dig the CF hood on the Sedan
Btw, would you be interested in a spare Enkei wheel? I have one straight one left in the set. I figured I'd offer it to you before scrapping them all
Btw, would you be interested in a spare Enkei wheel? I have one straight one left in the set. I figured I'd offer it to you before scrapping them all
Ahuzen- Experienced
- Ghey Points : 6
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Thanks, I knew the hood would look better with the SVT bumper, so I stuck to my plan.
What wheel is it?
What wheel is it?
NorCalFocus- Stawkaa
- Ghey Points : 74
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Yea, I think the SVT front is what helps it match the look. What filler did you use to fill in the cracks? I may smooth out the damage on mine before painting it
one of the EJ10s, I busted one of them and the others are a little rough. Two are straight and I could probably let them go for just shipping costs plus a little extra
one of the EJ10s, I busted one of them and the others are a little rough. Two are straight and I could probably let them go for just shipping costs plus a little extra
Ahuzen- Experienced
- Ghey Points : 6
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
His and hers...
[/quote]
So much WIN
jpdavis- Experienced
- Ghey Points : 1
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Ahuzen wrote:Yea, I think the SVT front is what helps it match the look. What filler did you use to fill in the cracks? I may smooth out the damage on mine before painting it
one of the EJ10s, I busted one of them and the others are a little rough. Two are straight and I could probably let them go for just shipping costs plus a little extra
These wheels?
I used White Star body filler for plastic.
NorCalFocus- Stawkaa
- Ghey Points : 74
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Nevermind, your 18s looked a lot like these. Which are the ones I was talking about. Thought they were the same wheel
http://www.ebay.com/itm/18x7-5-Enkei-J10-Black-Wheel-Rim-s-4x108-4-108-4x4-25-18-7-5-/160660891653?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item256822a805
http://www.ebay.com/itm/18x7-5-Enkei-J10-Black-Wheel-Rim-s-4x108-4-108-4x4-25-18-7-5-/160660891653?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item256822a805
Ahuzen- Experienced
- Ghey Points : 6
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Oh I was going to say I may know some with two other wheels like that
NorCalFocus- Stawkaa
- Ghey Points : 74
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
New additions....Ford Acc Rear lip and white wheels. My local exhaust shop is out of 3.5" tips right now, so once they get em in, I'm getting a one put on.
Magic floating car
My quickly made spray booth
Magic floating car
My quickly made spray booth
NorCalFocus- Stawkaa
- Ghey Points : 74
SVT3658- Elitist.
- Ghey Points : 144
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
SVT3658 wrote:
Thanks Josh. I know not many people look at this thread anymore, but I like to keep it updated since its the only thread thats been ongoing throughout my transformation.
Day time pics!
Next was my other small addition...A SVT center console. The shifter surround had holes for all the EAP option's so I fiberglassed over them, bondo'd and painted it to match my other painted pieces. I'll be placing an order with Steve for the cup holder inserts soon.
Lastly suggestions for center car overlays. I was simply thinking of white with black ford emblems. Here's the wheel for an idea of what I need covered.
NorCalFocus- Stawkaa
- Ghey Points : 74
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Love what you have done with this car. Looks awesome man!
KillerFocus53- Experienced
- Ghey Points : 1
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
I like your idea for the centercaps
And I ALWAYS at least read when there's new posts
And I ALWAYS at least read when there's new posts
SVT3658- Elitist.
- Ghey Points : 144
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
All the new stuff looks great!
FuhFuhhhh Focus- Experienced
- Ghey Points : 6
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Storm trooper ftw! I agree with the center cap idea. DO IT!
slocussvt- Specialist
- Ghey Points : 7
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Who else does vynil besides Josh Hendricks? He won't do copy righted stuff without premmission.
NorCalFocus- Stawkaa
- Ghey Points : 74
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Deaner does. https://www.facebook.com/dean.endsley
SVT3658- Elitist.
- Ghey Points : 144
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Looks damn good chris. If you could get an extra 1 to 1.5 inches of drop out of the front it would be near perfect. The SVT front looks sexy as hell with out side markers but wouldn't fly with the local law inforcement here. The white wheels look amazing too really awesome progress!
TheGlassMaker- Experienced
- Ghey Points : -4
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Don't tell him it's copy righted. lolNorCalFocus wrote:Who else does vynil besides Josh Hendricks? He won't do copy righted stuff without premmission.
He was going to do my sedan decals for me but the owner was willing to help out with what I wanted. So I told josh not to worry about it.
TheGlassMaker- Experienced
- Ghey Points : -4
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Josh knows the Ford emblem is copyrighted.
I will be putting in the euro fender markers to keep my shit legal.
I will be putting in the euro fender markers to keep my shit legal.
NorCalFocus- Stawkaa
- Ghey Points : 74
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Oh I see. Yea the euro markers would be sweet.
TheGlassMaker- Experienced
- Ghey Points : -4
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
So I fixed my reverse rake problem tonight I installed KW V1 coilovers I got from TheNorm. The rear fender heights are 23.5" alomost excatly what they were before. The front is at 23 5/8" for now. The front has about another inch in the adjustment, I just need to roll and pull the front fenders so I don't destroy them.
Doing werk son
Oh **** yeah
These will have to do until tomorrow...
The front is another inch lower than before. I can tell the difference getting in and out of my car.
Doing werk son
Oh **** yeah
These will have to do until tomorrow...
The front is another inch lower than before. I can tell the difference getting in and out of my car.
NorCalFocus- Stawkaa
- Ghey Points : 74
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
YESSSSSSSSS!!!!!!!!
glowin3232- Team Flatulence
- Ghey Points : 130
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Lower it.
Looks good, buddy!!!
Looks good, buddy!!!
Cobrawannabe- SALAMI!!!!!
- Ghey Points : 30
FuhFuhhhh Focus- Experienced
- Ghey Points : 6
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Finally. I'm excited for you!
SVT3658- Elitist.
- Ghey Points : 144
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Daytime pics!
Here's a pic of my front fitment. Like I said before I can go lower, but the fenders def need a roll.
Here's a pic of my front fitment. Like I said before I can go lower, but the fenders def need a roll.
NorCalFocus- Stawkaa
- Ghey Points : 74
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Looks much better now. So much win!!
TheGlassMaker- Experienced
- Ghey Points : -4
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Is the lowered slammed thread still going on FF? Go post some of my pics there please someone
NorCalFocus- Stawkaa
- Ghey Points : 74
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Yea it fuckin ezz but it's all FRPP drops and shit.... if I can fit may nutz in your wheeld gap yer knot low enufgh
Kenzx3- SHOW DROPPER!
- Ghey Points : 77
slocussvt- Specialist
- Ghey Points : 7
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Thanks to Mr. Holmes linking my thread, I was just looking back over the last few months of work. I miss my relocated battery. That is def getting worked on next.
NorCalFocus- Stawkaa
- Ghey Points : 74
SVT3658- Elitist.
- Ghey Points : 144
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
SVT3658 wrote:That's right, you have inspections out there....add one more plus to the list of why living in FL is better
haha nice. my cousin lives in cali and races a mitsubishi lancer ralliart. he goes to a lot of the hot import nights and two years back entered a tournament for some drift race that he went to and won a 2009 nissan gtr. the paint job was white but he changed it to black with purple lightning painted around the whole car. after that he put a buch of performance mods on it and had it putting out about 1,000 hp when he was done with it. he had to get it inspected and they failed him. he was so pissed. so instead of it being a car he could drive around town on the weekends he has it as a competition drag car now. god i love florida.
Royce01- Noob
- Ghey Points : 0
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
that looks amazing. I love the hood, I was thinking of putting either that hood or getting the evo hood after I buy the zetec engine. keep up dating. i saw your post and people still look at your forum bro we haven't forgot about it.
Royce01- Noob
- Ghey Points : 0
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Dam man, I like the front bumper, the wheel's, and the battery box placement is sick.
Got a few question, I didn't read too far back, but what happened to the cut hood, and did you make and think of putting the battery box there?
Dam, I've missed so much.
Got a few question, I didn't read too far back, but what happened to the cut hood, and did you make and think of putting the battery box there?
Dam, I've missed so much.
Djzx3- FF, please take me back!
- Ghey Points : -41
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
I finally got motivated again and got back to work. I cut and put in the fronts of my fender liners and put rubber undercoating on the rest of the inner fender. Here's some pics of the process.
Where I cut the fender liner
The newly cut liner installed
Fender all cleaned up ready for paint
And undercoated
Where I cut the fender liner
The newly cut liner installed
Fender all cleaned up ready for paint
And undercoated
NorCalFocus- Stawkaa
- Ghey Points : 74
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Nice work Chris.
But what happened to the hood you cut a hole in? Is it FS?
But what happened to the hood you cut a hole in? Is it FS?
Djzx3- FF, please take me back!
- Ghey Points : -41
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
No I traded it to a friend.
NorCalFocus- Stawkaa
- Ghey Points : 74
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
I was reading back through this thread and decided how much I miss having the vortex battery box installed. So tonight I grew a pair and cut some stuff and made it fit. My bay is back to awesomness.
****ty iPhone pics...You can see here where I chop the top part of the fog light.
We have clearance Clarence.
Next is to work on cleaning up the header. I don't know if I'll have the time and funds to wrap it before the Stanceworks show, so I was thinking about just painting it for now. Thoughts?
****ty iPhone pics...You can see here where I chop the top part of the fog light.
We have clearance Clarence.
Next is to work on cleaning up the header. I don't know if I'll have the time and funds to wrap it before the Stanceworks show, so I was thinking about just painting it for now. Thoughts?
NorCalFocus- Stawkaa
- Ghey Points : 74
SVT3658- Elitist.
- Ghey Points : 144
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Wrap it, and now your going to have to get a fancy looking trans mount.
That stock one looks stock, but nothing else does, also paint the trans bracket black, so it's less noticeable.
And I guess your going to have to shave the holes where the battery used to be, right?
That stock one looks stock, but nothing else does, also paint the trans bracket black, so it's less noticeable.
And I guess your going to have to shave the holes where the battery used to be, right?
Djzx3- FF, please take me back!
- Ghey Points : -41
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
To go much further into shaving this bay I would need to buy a welder and learn how to use it
I still like to drive my car to much to take it down for that long.
I still like to drive my car to much to take it down for that long.
NorCalFocus- Stawkaa
- Ghey Points : 74
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
Proper pics!
100_1875 by norcalfocus@rocketmail.com, on Flickr
100_1873 by norcalfocus@rocketmail.com, on Flickr
100_1875 by norcalfocus@rocketmail.com, on Flickr
100_1873 by norcalfocus@rocketmail.com, on Flickr
NorCalFocus- Stawkaa
- Ghey Points : 74
Re: NorCal's I hope I can go to FR11 and meet some cool turtles build thread
So I'm registered for the Stanceworks show. Not sure If I'll get picked but here's a few things I need to get done before I go either way...
touch up wheels (missed a few spots when I painted them)
repaint and repair the rad support
lower the front more (god I hope it can turn still)
fix the wire in the way of the shifter (I can't get the shifter into R)
touch up the paint in the bay
polish the hell out of the paint
touch up wheels (missed a few spots when I painted them)
repaint and repair the rad support
lower the front more (god I hope it can turn still)
fix the wire in the way of the shifter (I can't get the shifter into R)
touch up the paint in the bay
polish the hell out of the paint
NorCalFocus- Stawkaa
- Ghey Points : 74
Page 9 of 10 • 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Similar topics
» Jeremy's "I hope i can get all this crap done before FR11" thread
» Mike's "I'll be pounding some grenades and boosting my fists in Seaside instead of going to FR11" Build
» My '07's Carlisle Prep Thread but not FR11 (SAY WHUT?)
» Das Wagon Needs Build Thread Too
» Omar's build thread..... yes, you're seeing correct people
» Mike's "I'll be pounding some grenades and boosting my fists in Seaside instead of going to FR11" Build
» My '07's Carlisle Prep Thread but not FR11 (SAY WHUT?)
» Das Wagon Needs Build Thread Too
» Omar's build thread..... yes, you're seeing correct people
Page 9 of 10
Permissions in this forum:
You cannot reply to topics in this forum